I made a little progress on the car. I removed everything so I could replace the oil cooler line. It requres a 26mm (I think) to remove the oil line but I only have through 24mm. I ended up using a pipe wrench to remove the line.  The clutch hydrolics weren’t working right so I rebuilt the master, swapped a good slave I had and installed a SS clutch line.  I also changed all the oil (motor, tranny, and rear), had the wheels swapped and had an alignment done.

Next on the list is fix the exhause leak (needs a new gasket between the mani and the downpipe). After that it is replacing the O2 sensor, chean injectors, fix 6 port actuators, and replace all old vacuum lines.