I swapped out the front strut assemblies so I now eliminated the bad suspension squeak. I did discover that I will need to get new front sway bar links. I also swapped the transmission TSS which got rid of the fault code. I do still need to swap out the throttle cable and kickdown switch. I replaced the HID Lights and any other dead bulbs.

What’s left to do mechanically:

• Vented rear brakes including SS lines
• change oil in rear
• change the spark plugs
• change out the exhaust clamp between the downpipe and the rear
• Fuel filter
• Torque rod mount
• Replace transmission seals between trans and angle gear
• replace sway bar end links